Your heating kit is supplied with the neccesary installation components to install
correctly. You may however wish to purchase the optional accessories below to enable faster easier installation particularly if you install floor heating systems on a regular basis.

Pro-installer pack :  Includes heavy duty double sided tape, high tac adhesive spray and heavy duty strapping tapes. we also include an additional floor temperature sensor for the thermostat. Packs only supplied with our underfloor heating. 

Up to 10m²floor area £19.95                   Up to 20m² floor area £29.50

The pro-installer pack enables straight forward proffesional standard installation without the need to prime the floor first, thus negating the wait for the primers to dry. Just vacuum the floor, spray adhesive along floor edges and where tape runs are required, stick double sided tapes down and off you go. Saves time and therfore money.

Digital multimeter: Use to test the resistance readings of cables and mats before, during and after installation.These readings are neccessary to comply with requirements of the ten year warranty. Usefull for numerous applications around the home and garage such as checking fuses and electrical circuits. Complete with leads, pre installed battery and operating instructions.  Only supplied with under floor heating  £6.99

Fixings: For attaching Marmox insulation board to timber floors. Fixings required at the rate of 15 per board. 50 quantity 3.5 x 30mm treated screw with 50 quantity stainless steel M6 penny washers.  £6.95

Joint tape for Marmox insulation boards, applied prior to tiling. 48mm x 90m  £4.65

Fused spurs:

13amp switched fused spur, standard pattern white. 

13amp switched fused spur, MK pattern platinum supreme white.

13amp power breaker RCD spur. £29.95